industrial tubular heater
High Quality Defrost Heating Element
1.Sheath Material: SUS304/321/316L/Copper/Incoloy800 as required.
2.Voltage/wattage: 120v/325W
3.Wattage tolerance(under cold condition): +5%-10%
4.Tube diameter: 6.0/6.5/8.0/8.5/10.0/12.0mm or others as required.
5.Resistance powder: Magnesium oxide
6.Resistance wire: Ni80Cr20/Ocr25Al5
7.Faston terminal: Nickel plated iron(Material of terminal housing could be stainless iron,stainless steel if required)
8.Materials of terminal piece: stainless iron/stainless steel
9.Screw thread: 1"or2". Other thread can be made if required
10.Density: Max 30W/cm²
11.Shape: U or other shape as requirement
12.Warranty: 3000 working hour or at least one year
Read MoreOil Heating Element 120V 500W 1.125
1. All high temperature Oil Heating Element are available with a built in Thermocouple Type J or K
2. Sheath Material: SUS 304/316/ Incoloy 840
3. Spirals:Nickel-Chrome
4. Insulation:Magnesium Oxide Powder
5. Voltage Supply 12V to a maximum of 480V
6. Maximum Temperature: 750 °C
7. Resistance Tolerance:+10% - 5%
8. Wattage Tolerance:+5% - 10%
Read MoreSpring Coiled Heater for Plastic Injection Machine
1. Voltage available: 220V/230V/240V
2. Power available: 200W~2000W
3. Inner diameter: φ10~φ42mm
4. Length of the heater: 40~280mm
5. Maximum power density: 9W/cm²
6. Maximum working temperature: 650℃
Read MoreIndustrial Finned Heating Element
1.Sheath Material: SUS304、SUS321、SUS316L、SUS310S
2.Element diameter: 6.5/8/8.5/9/10/12mm, optional
3.Current Voltage and Watt: According to demand.
4.Length range: 10mm to 6000mm, according to demand.
5.OEM services: Available as per request.
Read MoreCustom-sized Silicone Rubber Heater with High Ductility
1.Heater type: Industrial heating element
2.Place of origin: Guangzhou, China
3.Voltage: 12-480V
4.Min thickness: 1.5mm
5.Weight: Depends on the customized size.
6.Available size: Of all specifications, can be customized
7.3M Adhesive: With or without. Customized.
8.Heater shape: Round/Square/Irregular, customized
9.Sample: Available for test.
10.OEM Service: Available. Sample test before order is welcomed.
11.Packaging: Poly bag and carton
Read MoreAir-conditioner Used PTC Heating Element
1.Working voltage: 12-240V. Both AC & DC are available.
2.Working condition(humidity): less than 90% relative humidity
3.Protection class: IPII(guaranteed)
4.Main part: Aluminum
5.Mounting: screw fitting
6.Fitting: Customized as per request
7.Features: long service life, efficient, no noise etc.
8.Application: Hand dryer/Air-hotting dryer/Clothing dryer/Shoes dryer/Dish dryer, etc.
Read MoreStainless Steel Heating Element for Water Heating 110V-240V,200W-10000W
1. Nickel Chrome resistance wire
2. Immersion Heaters are available with screw plug flanges
3. Air Heaters are available with MS or SS fins
4. Tubular heating elements with additional teflon sleeving is available forheating corrosive chemicals
Read MoreCustom-sized Silicone Rubber Heater
1. Supply Voltage: 0~400 V, 1 or 3 phase
2. Insulation Material: Fiberglass reinforced Silicone Rubber
3. Max. Operating Temp.: 260 Deg C or 500 Deg F
4. Min. Element Temp.: -50 Deg C or -58 Deg F
5. Max.Power Density: 5 w/sq.cm depending on application
6. Resistance Tolerance: about +/- 5%
7. Standard Thickness: 1.5 mm
8. Mechanical pressure: 100.00kg/cm²
9. Minimum bending radius: 3.20mm
Read MorePremium PERT Underfloor Heating Pipe
Introduction Under floor 35w/m Heating Cable is referred to as heat trace cable amongst the industry. It is used for a wide range of applications including pipe tracing, freeze protection, viscosity control, temperature process maintenance, roof and gutter deicing . Heating Tapes are more...Read MoreCeramic Infrared Heater Panel and Ceramic IR Heater
1. Shape: black hollow core, disk, flat plate, arc
2. Optional Power: 100W-2000W(based on size)
3. Other: thermocouple, probe of thermocouple
Read More