Silicone Drum Band Oil Drum Heater Silicone Rubber
1. Supply Voltage: 0~400 V, 1 or 3 phase
2. Insulation Material: Fiberglass reinforced Silicone Rubber
3. Max. Operating Temp.: 260 Deg C or 500 Deg F
4. Min. Element Temp.: -50 Deg C or -58 Deg F
5. Max.Power Density: 5 w/sq.cm depending on application
6. Resistance Tolerance: about +/- 5%
7. Standard Thickness: 1.5 mm
8. Mechanical pressure: 100.00kg/cm²
9. Minimum bending radius: 3.20mm
Silicone drum band oil drum heater silicone rubber introduction:
Silicone drum band oil drum heater silicone rubber can be manufactured from etched foil or from resistance wire as a wire wound circuit. The circuit pattern is vulcanized between two layers of silicon rubber and can be easily mounted to heat sinks or devices that need to be heated.
Silicone drum band oil drum heater silicone rubber's flexility can make your Silicone Rubber Heater in the shape of flat, spiral wrap, blanket, and molded to shape. Silicon rubber heater can be supplied with thermistors , thermostats, thermal fuses and thermocouples.
Silicone drum band oil drum heater silicone rubber's flexility will assemble the heater to your application through the process of vulcanization and the use of silicone and pressure sensitive adhesives.
Supply Voltage: 0~400 V, 1 or 3 phase
Insulation Material: Fiberglass reinforced Silicone Rubber
Max. Operating Temp.: 260 Deg C or 500 Deg F
Min. Element Temp.: -50 Deg C or -58 Deg F
Max.Power Density: 5 w/sq.cm depending on application
Resistance Tolerance: about +/- 5%
Standard Thickness: 1.5 mm
Flammability: Flame Retardant
Moisture Absorption: Moisture proof
Thermal Protection & Control: On board thermal fuse, thermostat, thermistor and PT100 are available as part of your thermal management solution.
Power Leads: 1 meter by default,other length available upon request
Mechanical pressure: 100.00kg/cm²
Minimum bending radius: 3.20mm
1.Maximum temperature resistant of insulation : 200℃
2.Best continuous working temperature as 150℃,max temperature as 230℃momentarily.
3.Power deviation: 8% insulation resistance:≥5MΩ
4.Compressive strength: 1500V/5S
5.Standard dimension: Width: 20mm-1000mm;Length: 25mm-1000mni;lead wire length:200 mm
6.Fast heat diffusion,Uniform heat transfer, Directly heat objects on; high thermal efficiency, high strength, long service life, work safe, not easy to aging.