Other Immersion Water Heating Element

• 

  Electric Flange Immersion Heater

  1.Rated: 380V/220V, customized
  2.Wattage: 1000W in general, customized
  3.Pipe diameter: standard in 8mm, other dimensions are available if required
  4.Pipe material: Incoloy/Copper/SUS304/Titanium etc. Customized
  5.Flange: DN40 1.5" or DN50...Read More

• 

  Industrial Used Flange Tubular Heater

  1.Rated: 380V/220V, customized
  2.Wattage: 1000W in general, customized
  3.Pipe diameter: standard in 8mm, other dimensions are available if required
  4.Pipe material: Incoloy/Copper/SUS304/Titanium etc. Customized
  5.Flange: DN40 1.5" or DN50...Read More

• 

  Copper Water Heating Element

  1.Tube Material: Copper
  2.Output power: 1000W-3000W(+5%, -10%)
  3.Voltage: 220V-240V/50Hz. 110V/60Hz
  4.Hi-pot test: 1800V/S min cold condition
  5.Leakage Current: 0.75ma max
  6.Insulation: 500MΩ
  7.Heating resistance wire: Ocr25AI5, Cr20NI80 or...Read More

• 

  Factory Supplied Water Heating Element

  1.Rated: 380V/220V, customized
  2.Wattage: 1000W in general, customized
  3.Pipe diameter: According to demand
  4.Pipe material: Incoloy/Copper/SUS304 etc. Customized
  5.OEM Service: Available as per request.
  Read More

• 

  Immersion Type Heater For Liquid Heating

  The immersion type heater for liquid heating normally comprise a fine coil of resistance heating alloy wire, usually Nichrome (NiCr) that is connected at each end to a terminal pin and is electrically insulated from a metallic tube, of stainless steel alloys, such as Incoloy,...Read More

• 

  220V Conductive Copper Heating Element

  Conductive copper heating element usually performs exceptional heat transfer by conduction, convection or radiation to heat liquids, air, gases and surfaces. Insulation of Magnesium offers greater heat transfer. Tubular heaters can be used in any application.Read More

• 

  Fast-heating Tap Used Copper Heater

  The fast-heating tap used electric heater is generally have the material options of incoloy , stainless steel, aluminum, bundy and copper sheath materials and also there is huge variety of selection of termination styles available.Read More

• 

  12mm 380V U-type Copper Heater

  The electric copper heaters are custom designed in a various shapes to as client’s requirements for direct immersion in liquids such as water, oils, solvents and process solutions, molten materials as well as air and gases.Read More

• 

  High Temperature Corrosion-resistant Copper Heater

  The high temperature corrosion-resistant copper heater is one of the most widely used methods for heating liquids (such as water, oil, heat transfer fluid and corrosive solutions). Designed for use in tanks and pressurized vessels, they are easy to install and maintain to...Read More

• 

  8mm Screwed Copper Electric Heater

  The screwed copper electric heater is applied to sauna drying machine, wet steaming machine, thermostat and commercial water heater. according to the usage of commercial water heater, the electric heating tube is designed with copper nickel plating, surface corrosion...Read More

• 

  220V 2.5KW Bucket Spiral Heating Element

  The bucket spiral heating elemnet is applied to sauna drying machine, wet steaming machine, thermostat and commercial water heater. according to the usage of commercial water heater, the electric heating tube is designed with copper nickel plating, surface corrosion resistant...Read More

• 

  Explosion-proof Kitchen Tap Electric Heating Element

  The explosion-proof kitchen tap electric heating element has the advantages of simple structure, long service life, high thermal efficiency, good mechanical strength, and safe use when being bent into various shapes. Electric heating tube with excellent electrical insulation...Read More