Thermal International Co.,Ltd

Closing the loop on thermal Solutions

High Temperature Anticorrosive Enamel Heating Element

High Temperature Anticorrosive Enamel Heating Element

Enamel electric heating element is a kind of water heating element produced by our company. The original electric heating tube is basically made of enamel technology, which can effectively prevent water scale and greatly prolong the service life of the electric heating element.

Send Inquiry
Product Details

PRODUCT OVERVIEW

Product Info.:


High Temperature Anticorrosive Enamel Heating Element


1. General specification parameters:

1). OEM service: Acceptable. 

2). Pipe diameter: 12mm in standard, can be customized according to the specific requirements. 

3). Pipe length: can be customized according to the specific requirements. 

4). Pipe shape: U-shape, J-shape, can be customized according to the specific requirements. 

5). Brand: Thermal. 

6). Place of origin: Jiangxi, China(mainland).

7). Power: 3000W. 

8). Working voltage: 220V, can be customized according to the specific requirements. 

9). Service life time: 1,000hours. 

10). Pipe material: Enamel, suitable for highly destructive liquid heating.


2. General features:

      Enamel electric heating element is a kind of water heating element produced by our company. The original electric heating tube is basically made of enamel technology, which can effectively prevent water scale and greatly prolong the service life of the electric heating element.

General Material:

  • Magnesium oxide rod is made by Saxon burg company, which has the advantages of high temperature resistance, good insulation performance, etc.

  • Magnesium oxide powder is made by tate ho company. it has the advantages of good thermal conductivity, high temperature resistance, good insulation, etc.

  • Nickel - chromium electric heating wire is made of the highest quality material in China, which has the advantages of rapid heat dissipation, high thermal efficiency, good thermal stability, high temperature resistance, etc.


3. Technical Indicators:

  1. Operating conditions: ambient temperature - 20 ℃ ~ + 60 ℃, relative temperature < 80 %.

  2. Electrical strength: no breakdown occurred in 1 minute after 1500V 50Hz cold voltage AC operation.

  3. Thermal insulation performance: AC 1600V 50 Hz for 1 minute without breakdown.

  4. Leakage current < 0.5 mA

  5. Insulation resistance > 20mΩ.

  6. Power deviation + 5 %, - 10 %.


4. Operation Precautions:

(1). this product is generally used for water heating, dry burning is strictly prohibited, at the same time it is                inapplicable for oil and other liquid heating.

(2). must be installed on the equipment with leakage protection and grounding device!


5. Our Advantages:

  • Thermal International has been specialized in thermal industry for over ten years, we long-term supply industrial & civil used heating element, mechanical timer, switch, thermostat(temperature sensor/switch)...to customers all over the world. We're equipped with our own experienced R&D department and can provide customers with the most considerate service and the best quality. 

  • We always adopt the excellent material, including the magnesia powder, the magnesia rod, high temperature and so forth. Aiming at offering the best product for all of our customers. 


6. Presentation:

Certificate.png

Certificate.png

Certificate.png

Certificate.png

Certificate.png


7. Our workplant:

8. Certificate:

证书.jpg

9. About us:

thermal.jpg

FAQ:

1. Are you a factory or a trading company?

A: We're an experienced factory with our exclussive Research & Development team. 

    Offering you the most professional service. 

2. Will you accept customized requirement?

A: Of course, customized service is surely acceptable. Welcome to send us your drawing and more detailed           specification parameters. We can supply you the products as per your specific requirements. 

3. Could I get some sample?

A: Yes, generally, 1pc sample for free is available. But if you need more samples, we may need to charge you       some cost. Besides, for certain products, it may need to open mold before sampling, then we shall need to         have the mold fee before sample. 

4. What's the delivery time for sample?

A: Generally it shall take 5~7days. For certain products, we need to prepare the materials for it. That depends.

5. What do you generally do in regarding to the products' quality control? 

A: We always put much emphasis on products quality. That's the priority. We shall contact strict quality                 inspection towards the products before delivery. And we've obtained the VDE, CE, UL, ISO and so forth.

Hot Tags: high temperature anticorrosive enamel heating element, China, factory, manufacturers, suppliers, buy, free sample
Inquiry