Industrial Heating Element
- 1.Working voltage: 12-240V. Both AC & DC are available.
2.Working condition(humidity): less than 90% relative humidity
3.Protection class: IPII(guaranteed)
4.Main part: Aluminum
5.Mounting: screw fitting
6.Fitting: Customized as per...Read More
- 1.Rated: 380V/220V, customized
2.Wattage: 1000W in general, customized
3.Pipe diameter: standard in 8mm, other dimensions are available if required
4.Pipe material: Incoloy/Copper/SUS304/Titanium etc. Customized
5.Flange: DN40 1.5" or DN50...Read More
- 1.Material:SS304/SS316/SS321/Incoloy800 etc.
2.Insulation Material: High-purity Mgo
3.Resistant wire element: Ni-Cr or FeCr
4.Lead Connection Option: Crimped or Swaged leads
5.Lead and type of connection leads: 10" Fiberglass Standard
- 1. Highest temperature is 1200 degrees
2. Maximum working temperature of 1000~1200℃
3. Service life is 8,000hours
- 1.Sheath Material: SUS304/321/316L/Copper/Incoloy800 as required.
3.Wattage tolerance(under cold condition): +5%-10%
4.Tube diameter: 6.0/6.5/8.0/8.5/10.0/12.0mm or others as required.
5.Resistance powder: Magnesium...Read More
- 1.Heater type: Industrial heating element
2.Place of origin: Guangzhou, China
4.Min thickness: 1.5mm
5.Weight: Depends on the customized size.
6.Available size: Of all specifications, can be customized
7.3M Adhesive: With...Read More
- 1. Voltage available: 220V/230V/240V
2. Power available: 200W~2000W
3. Inner diameter: φ10~φ42mm
4. Length of the heater: 40~280mm
5. Maximum power density: 9W/cm²
6. Maximum working temperature: 650℃
- 1. Supply Voltage: 0~400 V, 1 or 3 phase
2. Insulation Material: Fiberglass reinforced Silicone Rubber
3. Max. Operating Temp.: 260 Deg C or 500 Deg F
4. Min. Element Temp.: -50 Deg C or -58 Deg F
5. Max.Power Density: 5 w/sq.cm depending on...Read More
- 1.Sheath Material: SUS304、SUS321、SUS316L、SUS310S
2.Element diameter: 6.5/8/8.5/9/10/12mm, optional
3.Current Voltage and Watt: According to demand.
4.Length range: 10mm to 6000mm, according to demand.
5.OEM services: Available as per request.
- 1. Sheath material: Stainless steel material, like the SUS316/304/321 etc
2. Insulation material: Mica or Ceramic, optional
3. Heating wire: FeCr or Nickle Chrome wire
4. Heater size: Can be customized as per specific needs
5. Voltage available:...Read More
- Introduction Under floor 35w/m Heating Cable is referred to as heat trace cable amongst the industry. It is used for a wide range of applications including pipe tracing, freeze protection, viscosity control, temperature process maintenance, roof and gutter deicing . Heating...Read More
- 1. All high temperature Oil Heating Element are available with a built in Thermocouple Type J or K
2. Sheath Material: SUS 304/316/ Incoloy 840
4. Insulation:Magnesium Oxide Powder
5. Voltage Supply 12V to a maximum of...Read More